Excerpt:
Odipie 51.2 V 300 Ah 15.36 kWh IP50 LiFePO4 battery delivers 6000 cycles, CAN sync, stackable to 245 kWh; dealer-friendly pallet MOQ.
Features
15.36 kWh Compact Power: Odipie 51.2 V 300 Ah LiFePO₄ pack delivers 15.36 kWh in one 800 × 500 × 240 mm wall/floor unit—save warehouse space.
6 000+ Cycles @ 80 % DOD: Grade-A EVE/CATL cells rated for 10-year daily cycling, cutting replacement cost per kWh.
32-Pack Parallel Ready: Clip-and-busbar design scales from 15 kWh
Smart BMS Inside: CAN/RS485 + Bluetooth/Wi-Fi ports; active balancing, over-current, over-temp, short-circuit.
Plug-and-Play Kit: M8 copper lugs, RJ45 cable, wall bracket, rollers included—one-person install in 15 min, lower labor quotes.
Target Applications
- Off-grid villas & tiny homes—store daytime PV, run 5 kW–10 kW inverters overnight.
- Peak-shaving for small shops & offices—cut demand charges without gensets.
- Retrofit lead-acid banks—same 48 V nominal, 2× energy, ½ weight.
Note: This classic is intended for energy storage and deep-cycle use only; it is not suitable for high-amperage cranking applications like starting engines or golf carts.
Parameters
| Model | 51.2V 300Ah Wall-Mount LFP |
|---|---|
| Nominal voltage | 51.2V |
| Nominal capacity | 300Ah |
| Nominal energy | 15.36kWh |
| Operation voltage range | 40V~58.4V |
| Charge voltage | 58.4V |
| Standard charging current | 60A |
| Max. continuous charging current | 200A |
| Standard discharging current | 60A |
| Max. continuous discharging current | 200A |
| Communication | RS485 /CAN /Dry contact / RS232 (Optional) |
| IP ratings | IP50 |
| Cycle life | 6000 cycles |
| Weight | ≈130kg |
| Dimension(W*H*D) | 850*500*240mm |
| Operation temperature range | -20 ~ 60 ℃ |
Charging Methods
- Solar DC Couple: Pair with 48 V MPPT; 50 A–150 A charge current, 57.6 V absorb.
- Generator Boost: Activate “quiet” mode—limit input to 30 A, full in 5 h.










